Luxon® is a light-curing, ceramic-free, acrylic design material particularly suitable for color-transparent applications. Curing Luxon® depends on the color and thickness of the material. Depending on your desired effect, you might need to apply additional layers of material with corresponding additional exposures to the blue light.
Properties:
- Surface Hardness of 140 N/mm²
- High-quality surfaces with high color fastness
- Individually polishable surfaces (matt gloss – high gloss)
- High bond to metal
- Mix this Transparent with other colors to produce a unique, almost translucent effect
- Mix with White for a pastel effect
- Fast curing with visible blue light (480 nm)
- Ready to use
General steps:
Sandblast the metal surface including side walls
Thoroughly clean your pieces
Apply of Luxon® Link
Apply HyCeram® Bond
Use TwinLux Dual to cure with UV light (440-480nm)
Roll off the resulting inhibited layer with the foam roller
Apply your choice of Luxon® color
Use TwinLux Dual to cure with UV light (440-480nm) for 60 sec.
Can finish by grinding and/or polishing to achieve your desired result.
Exposure to light from the TwinLux Dual curing tool for 1-minute yields the following different, color specific curing depths:
our 821-3800 Pure Clear = > 30mm
our 821-3802 Atlas White = > 3mm
our 821-3804 Chili Red = > 0.5mm
our 821-3806 Gulf Orange = > 0.5mm
our 821-3808 Oriole Yellow = > 0.3mm
our 821-3810 Victoria Green = > 0.8mm
our 821-3812 Rally Blue = > 2.5mm
our 821-3814 Piano Black = > 0.2mm
Storage:
Store at room temperature (15°C-28°C = 58°F-82°F).
Keep containers closed
Do not expose containers to sunlight
| Brand | Luxon® |
| Color | Orange |
| Container Size | 20ml |
| Country of Origin | Austria |
